Vegetables Gardening - Growing Organic Vegetables

We have created a slick template for drilling the holes in the 200 psi pipe that saves TONS of time.. when going good we can have all the holes drilled in about 3 minutes per pipe including setup. My daughter and I created the youtube videos for creating and using the template with some instructions as well. The files are pretty big though.. I hope they help some out.

Step1: Sprinkler Block Straight Line For Mittleider Pipe System
http://youtu.be/P4d2wgo1u20

Step 2: Sprinkler Template Creator For Mittleider Pipe System
http://youtu.be/HgFU8tJgNeA

Step 3: Using Template To Drill Holes For Mittleider Pipe System
http://youtu.be/xErHQZ84lnE

I hope these links help you.

I sent email as well but it doesn't look like it made it so I am posting this way as well..Happy gardening!
George

--- In MittleiderMethodGardening@yahoogroups.com, "Oceana_12345" <oceana_12345@...> wrote:
>
> Thanks so much Bryan for this video!
>
> Tiffanie
>
> --- In MittleiderMethodGardening@yahoogroups.com, "Bryan" <sorensonbj@> wrote:
> >
> > Here a link to a short video showing how I do it. I would think that you could use angle iron or wood to do the same thing. I just use unistrut cause I've always got some on hand.
> > http://bryansorenson.com/garden/2012/03/05/watering-pipe-drilling-jig/
> > Bryan
> >
> >
> >
> >
> >
> >
> >
> > --- In MittleiderMethodGardening@yahoogroups.com, Bryan Sorenson <sorensonbj@> wrote:
> > >
> > > Hi all
> > > To make my water pipes i used a long piece of uni-strut as a jig. I
> > > put a mark every three inches with a sharpie marker on it. Then clamp
> > > the pipe to the strut, go along and drill a hole next to the edge of
> > > the strut at each mark. just roll the pipe 45 degrees re-clamp and do
> > > the next row of holes. roll it another 45 degrees and do the last row.
> > > its very quick and easy.
> > > I'll see if I get some time monday to take afew photos of it set up.
> > > Bryan
> > >
> >
>

• New Members 14
• New Photos 8