[MittleiderMethodGardening] Re: Mittleider pvc watering system
Here a link to a short video showing how I do it. I would think that you could use angle iron or wood to do the same thing. I just use unistrut cause I've always got some on hand.
http://bryansorenson.com/garden/2012/03/05/watering-pipe-drilling-jig/
Bryan
--- In MittleiderMethodGardening@yahoogroups.com, Bryan Sorenson <sorensonbj@...> wrote:
>
> Hi all
> To make my water pipes i used a long piece of uni-strut as a jig. I
> put a mark every three inches with a sharpie marker on it. Then clamp
> the pipe to the strut, go along and drill a hole next to the edge of
> the strut at each mark. just roll the pipe 45 degrees re-clamp and do
> the next row of holes. roll it another 45 degrees and do the last row.
> its very quick and easy.
> I'll see if I get some time monday to take afew photos of it set up.
> Bryan
>
9:29 AM
|
|
This entry was posted on 9:29 AM
You can follow any responses to this entry through
the RSS 2.0 feed.
You can leave a response,
or trackback from your own site.


0 comments:
Post a Comment